Page 1 of 1
Reverse Camera
PostPosted:Sat Jul 09, 2016 11:46 am
by opiwan
Hallo,
how i mirror the screen of reverse camera?
thx for help
Re: Reverse Camera
PostPosted:Thu Jul 14, 2016 8:40 am
by admin
NAVISKAUTO headrest is supported to mirror the screen from other device,if the Reverse Camera you refered has the function of video output.
First, connect the output of Reverse Camera(audio&video cable) with the input of NAVISKAUTO Headrest.
[attachment=0]t0122ff684c9a580b63.png[/attachment]
[attachment=3]P60714-150430.jpg[/attachment]
If you use the Adapter cable to power-up the Headrest.you will not use the AV cable above,you may connect the AV Cable to the corresponding interface of Reverse Camera.
[attachment=2]P60714-150530.jpg[/attachment]
Second,on the Headrest,select AV 1 or AV2 mode.If you use the Adapter cable,select AV 1 mode,if use the 3.5mm AV interface,select AV 2 mode.Then you can watch the input video on the Headrest.
[attachment=1]QQ图片20160714152316.png[/attachment]
Re: Reverse Camera
PostPosted:Sat Jul 23, 2016 9:03 pm
by Thomas311
Hallo,
habe mir ein c0255 zugelegt und habe jetzt Probleme mit der sprachausgabe von apps und bluetooth.
Probleme.
apps installiert:
Navigon Navigation
Blitzer. de plus
1) app auf Radio : Navigon ruckelt.
2) app auf Radio : Blitzer.de keine Sprache über Lautsprecher.
3) bluetooth verbindung mit Handy Samsung galaxy s5 plus. Kopplung ist ok. mit radio player > handy steuern (play, vor und zurück) ist ok. aber keine sprache über Lautsprecher von auto.
4) blitzer.de auf handy mit bluetooth gekoppelt an Radio. aber keine sprache über radio.
5) Update android 4.4 auf android 5 wie?
habe hier geschrieben da ich kein neues Thema eröffnen kann
hoffe ich bekomme hier hilfe
bsp Reverse Camera
PostPosted:Sun Nov 18, 2018 9:00 pm
by Maqwet
For the receiver in the front you will need to find the reverse wire in the main harness at the front of the car. Also that wire will need to be hooked up to the dvd player to trigger the camera to come up on the screen when it goes into reverse.
Re: Reverse Camera
PostPosted:Mon Nov 19, 2018 3:38 am
by admin
Hi,
Thanks for Maqwet's correct answer.Connect the video out cable of the reverse camera(as picture shown) with the ISO wire of DVD player, and adjust the DVD player to AV mode, then the player would display.
[attachment=0]1.png[/attachment]
Regards
bsp Reverse Camera
PostPosted:Mon Nov 19, 2018 10:27 pm
by Maqwet
So I had a few questions about a reverse camera transmitter/receiver wireless ones.
Which are the reverse lights in the boot i.e. what colour?
Where should I connect the receiver for it to get power?
Re: Reverse Camera
PostPosted:Wed Nov 21, 2018 9:15 am
by admin
Hi,
The line in the middle of the picture is the power line of the reverse camera, which powers the camera.The positive power cable ( red) of the reverse camera is connected to the positive line of the reverse light, and the negative power line ( black) is grounded.
Regards