NAVISKAUTO SUPPORT CENTER

[Artur]

When I connect the DVD-Player (CH1007B) by AV-Out to another screen, I dont see the video on the second screen (but I can hear audio on connected device). I did try several setups:

CH1007B - AV-Out -> Video-In to a second headrest display

CH1007B - AV-Out -> Video-In to my TV

CH1007B - ISO-Adapter-Port -> Video-Out -> Video-In to headrest display (as described here http://www.sokesi.com/forum/viewtopic.php?f=8&t=30)

The cables are ok, I did check them with a different source.

Did i miss some setting or is the AV-Out not working on my device?

[admin]

Hi

If there only audio on connected device,maybe the ISO Wiring Harness has problem,you can contact our customer service to send you a new one.If you used the AV-Out port,you must use the longer plug as follow.
[attachment=0]AV plug.png[/attachment]
regards

[Artur]

OK, lets put aside the ISO Wiring Harness for now.

I used such a (longer) AV-plug for AV-Out. It did NOT work (same as before: Audio, but no Video on the other device).

Then I tried it the other way around: to get the video of another player on my Naviskauto monitor.

So I used the same cable from AV-Out of the other device to the AV-IN of the Naviskauto CH1007B. It worked: I got Audio and Video on the Naviskauto monitor. If it works this way, shouldn't work the same cable the other way around as well (AV-Out Naviskauto -> AV-In 2nd device)?

So I suppose the AV-Out of Naviskauto is not working. Am I right?

[admin]

Yes,in this case,the AV-Out may have a problem,you can contact our customer service to handle this.

regards